Tpm Connector (20-1 Pin Tpm); Chassis Intrusion Connector (4-1 Pin Chassis) - Asus B85M-G R2.0 Instructions Manual

13.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch. Connect
one end of the chassis intrusion sensor or switch cable to this connector. The chassis
intrusion sensor or switch sends a high-level signal to this connector when a chassis
component is removed or replaced. The signal is then generated as a chassis intrusion
event.
By default, the pin labeled "Chassis Signal" and "Ground" are shorted with a jumper
cap. Remove the jumper caps only when you intend to use the chassis intrusion
detection feature.
B85M-G R2.0
B85M-G R2.0 Chassis intrusion connector
14.

TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.
B85M-G R2.0
B85M-G R2.0 TPM connector
The TPM module is purchased separately.
1-20
CHASSIS
PIN 1
TPM
PIN 1
Chapter 1: Product introduction