Chassis Intrusion Connector (4-1 Pin Chassis) - Asus P5WDG2 WS Professional User Manual

9.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor
or switch. Connect one end of the chassis intrusion sensor or switch
cable to this connector. The chassis intrusion sensor or switch sends
a high-level signal to this connector when a chassis component
is removed or replaced. The signal is then generated as a chassis
intrusion event.
By default, the pins labeled "Chassis Signal" and "Ground" are shorted
with a jumper cap. Remove the jumper caps only when you intend to
use the chassis intrusion detection feature.
P5WDG2-WS PRO Chassis intrusion connector
ASUS P5WDG2 WS Professional/P5WDG2 WS PRO/WiFi-AP
CHASSIS
(Default)
2-37