Table of Contents
Advertisement
III. INSTALLATION
DRAM Memory Installation Procedures
IMPORTANT: Install memory modules in symmetric pairs.
1. The SIMM memory modules will only fit in one orientation as shown because
of a "Plastic Safety Tab" on one end of the SIMM slots which requires the
"Notched End" of the SIMM memory modules.
72 Pin SIMM Sockets
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the slot.
3. With your finger tips, rock the memory module into a vertical position so that it
clicks into place.
72 Pin DRAM in SIMM Socket
Clip
Plastic Safety Tab (This Side Only)
4. The plastic guides should go through the two mounting holes on the sides and
the clips should snap on the other side.
5. To release the memory module, squeeze both clips outward and rock the module
out of the clips.
ASUS P/I-P65UP8 User's Manual
2 1
1 2 3 4
5 6 7 8
i960
System Memory
Memory
Mounting Hole
Notched End
19
Advertisement
Table of Contents
