Dram Memory Installation Procedures - Asus P I-P6NP5 User Manual

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown
because of a "Plastic Safety Tab" on one end of the SIMM sockets
which requires the "Notched End" of the SIMM memory modules.
2. Press the memory module firmly into place starting from a 45 degree
angle making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position
so that it clicks into place.
72 Pin DRAM in SIMM Socket
Metal Clip
Plastic Safety Tab (This Side Only)
4. The plastic guides should go through the two "Mounting Holes" on the
sides and the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards
and rock the module out of the "Metal Clips".
1 2 3 4
Bank 0 Bank 1
72 Pin SIMM DRAM Sockets & Module
P/I-P6NP5 User's Manual
Notched End
Mounting Hole
13