Dram Memory Installation Procedures - Asus P I-P55T2P4S User Manual

III. INSTALLATION
IMPORTANT: Do not use memory modules with more than 24 chips per mod-
ule. Modules with more than 24 chips exceed the design specifications of the
memory subsystem and will cause unreliable operation.
IMPORTANT: Do not use SIMM Modules that use an extra TTL chip to con-
vert the memory module from asymmetric to symmetric.

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown
because of a "Plastic Safety Tab" on one end of the SIMM slots which
requires the "Notched End" of the SIMM memory modules.
2. Press the memory module firmly into place starting from a 45 degree
angle making sure that all the contacts are aligned with the slot.
3. With your finger tips, rock the memory module into a vertical position
so that it clicks into place.
Support Clip
Safety Tab (This Side Only)
4. The plastic guides should go through the two "Mounting Holes" on the
sides and the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards
and rock the module out of the "Metal Clips".
1 2 3 4
72 Pin SIMM DRAM Slots & Module
72 Pin DRAM in SIMM Socket
P/I-P55T2P4 User's Manual
Notched End
Mounting Hole
13