Dram Memory Installation Procedures - Asus P65UP5-PKND User Manual

III. INSTALLATION

DRAM Memory Installation Procedures

IMPORTANT: Install memory modules in symmetric pairs.
1. The SIMM memory modules will only fit in one orientation as shown because
of a "Plastic Safety Tab" on one end of the SIMM slots which requires the
"Notched End" of the SIMM memory modules.
72-Pin SIMM Sockets
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the slot.
3. With your finger tips, rock the memory module into a vertical position so that
it clicks into place.
Support Clip
Safety Tab (This Side Only)
4. The plastic guides should go through the two mounting holes on the sides and
the clips should snap on the other side.
5. To release the memory module, squeeze both clips outward and rock the mod-
ule out of the clips.
ASUS P/I-P65UP5 User's Manual
2 4 6 8
B0 B1 B2 B3
72 Pin DRAM in SIMM Socket
1 3 5 7
Notched End
B0 B1 B2 B3
B=Bank
Mounting Hole
17