Table of Contents
Advertisement
IV. BIOS SOFTWARE
Details of Standard CMOS Setup:
Date
To set the date, highlight the "Date" field and then press the page up/page
down or +/- keys to set the current date. Follow the month, day and year
format. Valid values for month, day and year are:
Month:
Day:
Year:
Time
To set the time, highlight the "Time" field and then press the page up/page
down or +/- keys to set the current time. Follow the hour, minute and sec-
ond format. Valid values for hour, minute and second are:
Hour:
Minute:
Second:
time, just press the <Enter> key twice if you do not want to modify the current
You can bypass the date and time prompts by creating an AUTOEXEC.BAT
file. For information on how to create this file, please refer to the MS-DOS
manual.
Hard Disks
This field records the specifications for all non-SCSI hard disk drives in-
stalled in your system. The on-board PCI IDE connectors provide Primary
and Secondary channels for connecting up to four IDE hard disks or other
IDE devices. Each channel can support up to two hard disks; the first of
which is the "master" and the second is the "slave".
Specifications for SCSI hard disks need not to be entered here since they
operate using device drivers and are not supported by any the BIOS. If you
install the optional PCI-SC200 SCSI controller card into the motherboard
(see page 52 for instructions). If you install other vendor's SCSI controller
card, please refer to their respective documentations on how to install the
required SCSI drivers.
28
1 to 12
1 to 31
up to 2099
00 to 23
00 to 59
00 to 59
P/I-P55T2P4 User's Manual
Advertisement
Table of Contents
