Maintenance Parts; Replacing The Toner Cartridge - Samsung ML-6512ND User Manual

ACCESSORY FUNCTION
IEEE 802.11 b/g/n Allows you to connect your
printer to a wireless network.
a
Wireless LAN
Short Stand You can easily move the
machine using the stand with its
wheels.
When using the optional
Stand, you must install
the foot as shown in the
Stand Installation Guide
provided with the optional
Stand. Otherwise, the
machine can fall down
and break, causing injury
to human.
IEEE 1284 parallel Allows you to use various inter-
connector face.
• When installing the
printer driver with an
IEEE 1284 parallel
connector, the
machine might not be
found and after install-
ing the printer driver,
only basic printing fea-
tures are available.
• If you want to check
the machine's status
or set the settings,
connect the machine
to a computer with a
USB cable or a net-
work.
• If you use the parallel
connector, you can-
not use the USB
cable.
Staple Cartridge Allows you to staple the print-
outs.
Maintenance Kit Consists of maintenance parts. ML-PMK65K
a. Depending on your country, wireless LAN cards may not be available.
Contact your local Samsung dealer or the retailer where you bought
your machine.

MAINTENANCE PARTS

To purchase maintenance parts, contact the source where you bought the
machine.
Replacing maintenance parts can be performed only by an authorized ser-
vice provider, dealer, or the retailer where you bought the machine. The
warranty does not cover the replacement of any maintenance parts once it
has reached its "Average Yield".
Maintenance parts are replaced at specific intervals to avoid print quality
and paper feed problems resulting from worn parts, see table below. The
purpose of which is to maintain your machine in top working condition. The
maintenance parts below should be replaced when the life span of each
item has been met.
PART NAME
ML-NWA65L
Fuser unit
ML-DSK65S
TR Assy
Tray1 Retard Roller
Pickup/Forward Roller
a. It will be affected by operating system used, computing performance,
application software, connecting method, media type, media size and
job complexity.

REPLACING THE TONER CARTRIDGE

ML-PAR100
When the toner cartridge reaches its estimated cartridge life:
•
•
•
At this stage, the toner cartridge needs to be replaced. Check the type of the
toner cartridge for your machine (see "Available supplies" on page 95).
1. Open the top cover and pull the toner cartridge out.
SCX-STP000
2. Remove the new toner cartridge from its bag.
Supplies and accessories_ 96
PARTS
Click this link to open an animation about replacing the toner cartridge.
The Smart Panel program window appears on the computer telling you
the toner cartridge needs to be replaced.
The LCD display shows a message telling you the toner cartridge needs
to be replaced.
The machine stops printing.
Do not use sharp objects, such as a knife or scissors, to open the
toner cartridge package. They might scratch the drum of the car-
tridge.
a
AVERAGE YIELD
Approx. 150,000 pages
Approx. 100,000 pages
Approx. 100,000 pages
Approx. 200,000 pages