Printing On Special Media; Envelope - Samsung ML-6512ND User Manual

4. Squeeze the multi-purpose tray paper width guides and adjust them
to the width of the paper. Do not force them too much, or the paper
will bent resulting in a paper jam or skew.
5. When you print a document, set the paper type and size for the
multi-purpose tray. For information about setting the paper type and
size on the control panel (see "Setting the default tray and paper" on
page 47).
The settings made from the machine driver override the set-
tings on the control panel.
a) To print in application, open an application and start the
print menu.
b) Open Printing Preferences. (See "Opening printing pref-
erences" on page 50.)
c) Press the Paper tab in Printing Preferences, and select
an appropriate paper type.
For example, if you want to use a label, set the paper type
to Label.
d) Select MP Tray in paper source, then press OK.
e) Start printing in application.
f) After printing, close the multi-purpose tray.

PRINTING ON SPECIAL MEDIA

The table below shows the available special media for each tray.
When using special media, we recommend you feed one paper at a
time. Check the maximum input number of media for each tray (See
"Print media specifications" on page 108).
TYPES TRAY 1
Plain ●
Thick ●
Thicker
Thin ●
Bond ●
Color ●
CardStock ●
Labels ●
OPTIONAL MULTI-PURPOSE
TRAY TRAY
● ●
● ●
●
● ●
● ●
● ●
● ●
● ●
Media and tray_ 45
TYPES TRAY 1
Transparency ●

Envelope

●
Preprinted ●
Cotton ●
Recycled ●
Archive ●
Hole Punched ●
(●: Supported, Blank: Not supported)
When you use recycled paper as a used paper, printouts might be
wrinkled and/or jamming may occur due to excessive curl.
Envelope
Successful printing on envelopes depends upon the quality of the enve-
lopes.
To print an envelope, place it flap side up with the stamp area bottom the
top right side.
• When selecting envelopes, consider the following factors:
- Weight: The weight of the envelope paper should not exceed
2
90 g/m otherwise, jam may occur.
- Construction: Prior to printing, envelopes should lie flat with less
than a 7 mm curl and should not contain air.
- Condition: Envelopes should not be wrinkled, nicked, either dam-
aged.
- Temperature: Use envelopes that are compatible with the heat and
pressure of the machine during operation.
• Use only well-constructed envelopes with sharp-and well-creased folds.
• Do not use stamped envelopes.
• Do not use envelopes with clasps, snaps, windows, coated lining,
self-adhesive seals, or other synthetic materials.
• Do not use damaged or poorly made envelopes.
• Be sure the seam at both ends of the envelope extends all the way to
the corner of the envelope.
1 2
1 Acceptable
2 Unacceptable
• Envelopes with a peel-off adhesive strip or with more than one flap that
OPTIONAL MULTI-PURPOSE
TRAY TRAY
● (only for
●
optional tray 2)
● ●
● ●
● ●
● ●
● ●