Understanding Display Messages - Samsung ML-6512ND User Manual
User manual ver.1.03 (english)
Hide thumbs
Also See for ML-6512ND:
- Manual del usuario (135 pages) ,
- User manual (130 pages) ,
- Specification (14 pages)
Table of Contents
Advertisement
1. Remove the jammed paper by pulling in the direction shown. To
avoid tearing the paper, pull it out gently and slowly.
2. Open and close the mailbox's rear cover to resume printing.
UNDERSTANDING DISPLAY MESSAGES
Messages appear on the Smart Panel program window or on the control
panel display to indicate machine status or errors. Refer to the tables below
to understand the messages' meaning to correct the problem. Messages
and their explanations are listed in alphabetical order.
•
Select the error message and press OK in the control panel to see
in details.
•
If a message is not in the table, reboot the power and try the print-
ing job again. If the problem persists, call for service.
•
When you call for service, provide the service representative with
the contents of display message.
•
Some messages may not appear in the display depending on the
options or models.
•
[error number] indicates the error number.
•
[tray type] indicates the tray number.
•
[media type] indicates the media type.
•
[media size] indicates the media size.
MESSAGE
802.1x Network
Error
Door is open.
Close it
Error: [error num-
ber]
Call for service
Error: [error num-
ber]
Turn off then on
Error: [#C1-1311]
Error: [#H1-1230,
#H1-1233,
#H1-1330, #H1-1333,
#H1-1430, #H1-1433,
#H1-1530, #H1-1533,
#H1-2230, #H1-2233,
#H1-2330, #H1-2333,
#H1-2430, #H1-2433]
Error:
[#H2-1710,#H2-1711,
#H2-1720, #H2-1721,
#H2-1730, #H2-1731,
#H2-1750, #H2-1751,
#H2-1752, #H2-1753,
#H2-1760, #H2-1761,
#H2-1800, #H2-1A50,
#H2-1A52,#H2-1A70,
#H2-1A80]
Error: [#H2-4700,
#H2-4701, #H2-4710,
#H2-4711, #H2-4A50]
Finisher door Open
Finisher stacker Full
Fuser not compati-
ble
IMG. Not Compati-
ble
Troubleshooting_ 83
SUGGESTED SOLU-
MEANING
Fail to authenticate.
Check the network
authentication protocol.
If the problem persists,
contact your network
administrator.
The door is open.
Close the door.
A systematic error has
Unplug the power cord
occurred
and plug it back in. If the
problem persists, call
for service.
The machine unit cannot
Unplug the power cord
be controlled.
and plug it back in. If the
problem persists, call
for service.
Toner is not evenly dis-
Redistribute the toner
tributed.
(See "Redistributing
toner" on page 74).
The machine cannot
Reinstall the optional
communicate with the
tray(s). If the problem
optional tray.
persists, call for service.
There is a problem in the
Check the finisher. Call
finisher.
for service if needed.
There is a problem in the
Check the mailbox. Call
mailbox.
for service if needed.
The finisher door is open
Close the finisher door.
Too much paper in fin-
Remove the printed
isher stacker.
paper.
The fuser unit you have
Install a Samsung-gen-
installed is not for your
uine fuser unit,
machine.
designed for your
machine.
The imaging unit you
Install a Samsung-gen-
have installed is not for
uine imaging unit,
your machine.
designed for your
machine.
TIONS
Advertisement
Table of Contents
