Setup; Setup Operation; General Setup; General Setup Operation - Alpine INE-W940 Owner's Manual

Setup

Setup Operation

Touch the [SETUP] icon on the Audio/Visual Playback screen to
display the Setup main screen.

General Setup

General Setup Operation

To display the General Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the General mode operation has
been released. Engaging the parking brake can reactivate the
General Setup Menu, as long as the car's ignition has not been
turned off. It is not necessary to repeat the above procedure
(1 through 3) of "To display the General mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the General mode screen."
The following steps 1 to 5 are common operations to each
"Setting item" of General Setup. Refer to each section for
details.
1
Touch [Setup] icon of Top banner.
The Setup main screen is displayed.
30
-EN
2
[Setup] icon
3
Setting items: Language / Clock Display /
4
5
• Immediately after changing the settings of General Setup (While the

Language Setting

[Language] is selected on the General setup menu in step 3. Refer to
"General Setup Operation" (page 30).
Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: Auto Scroll
Setting contents: Off (Initial setting) / On
Touch [General].
The General Setup screen appears.
Select the desired item.
Top/Bottom Banner Fade Out /
Screen/LED Customize / Visual / About /
Installation
• Depending on the item, repeat step 3.
Touch [ ] or [ ] etc., to change its setting.
• When the pop-up window for setup is displayed, touch [
close the window after setting.
Touch [ ] to return to the previous screen.
system is writing data automatically) do not turn the ignition key to
OFF. Otherwise, the settings may not be changed.

Setting the Scroll

Turns off the scroll mode.
Off:
On: Turns on the Auto scroll mode. Scroll display is repeated
as long as the mode is turned on.
] to