Table of Contents
Advertisement
31/32) SATA_DOM1/SATA_DOM2 (SATA port 0 and port 1 DOM Jumpers)
CAUTION!
• If the SATA DOM power is supplied by the motherboard, set the jumper to pin 1-2.
• If the SATA DOM power is supplied by external power, set the jumper to pin 2-3.
• If a SATA type hard drive is connected to the motherboard, please ensure the jumper is closed
and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage.
Please refer to the pin definition table in the following.
SATA_DOM1
SATA_DOM2
Hardware Installation
For SATA_DOM1
1
For SATA_DOM2
1
- 32 -
Pin No.
Definition
1
P5V
2
SATA_DOM_1
3
GND
Pin No.
Definition
1
P5V
2
SATA_DOM_2
3
GND
Advertisement
Table of Contents
