Table of Contents
Advertisement
35
SATA_DOM1
36
J_HDA_SDO1
37
U7
38
F_USB1
39
BP_1
40
SGPIO
41
LAN3/LAN4
42
FP_1
43
COM2
44
PCI_1
45
PCI_2
46
PCI_3
47
IPMB1
48
PCIE_1
49
PCIE_2
50
BMC_LED2
51
PCIE_3
52
PCIE_4
53
CPU0_FAN1
CAUTION! If a SATA type hard drive is connected to the motherboard, please ensure the jumper is
closed and set to 2-3 pins (Default setting), in order to reduce any risk of hard disk damage. Please
refer to Page 31 for SATA_DOM1 and SATA_DOM2 jumper setting instruction.
SATA port 0 DOM support jumper.
ME recovery jumper
Intel C224 Chipest
USB 2.0 header
Back plane board header
SGPIO header
LAN3 Active LED (Right)
LAN4 Active LED (Left)
Front panel header
Serial port cable connector
PCI 32bit/33MHz slot
PCI 32bit/33MHz slot
PCI 32bit/33MHz slot
IPMB connector
PCI-E x16 slot (Shared bandwidth with PCIE_2/
PCIE_3 slot)
PCI-E x16 slot (Shared bandwidth with PCIE_1/
PCIE_3 slot)
BMC readiness LED
PCI-E x16 slot (Shared bandwidth with PCIE_1/
PCIE_2 slot)
PCI-E x16 slot (running at x1 mode)
CPU fan connector
- 8 -
Advertisement
Table of Contents
