Home Menu; Using The Home Menu; Manual Speaker Setup; Speaker Setting - Pioneer HTP-072 Operating Instructions Manual

Home menu

Chapter 5:
Home menu

Using the Home menu

The following section shows you how to make detailed
settings to specify how you're using the receiver, and also
explains how to fine-tune individual speaker system settings
to your liking.
Important
• The OSD will not appear if you have connected using the
HDMI output to your TV. Use composite connections for
Home Menu.
• If headphones are connected to the receiver, disconnect
them.
• You can't use the Home Menu when the iPod/USB
input is selected.
PARAMETER
TOP
MENU
TV
RECEIVER
SLEEP SOURCE CONTROL
RECEIVER
INPUT SELECT
INPUT
HOME
BD DVD CD
MENU
PTY
iPod CTRL
CH
TUNER iP d/USB SAT/CBL
1 Switch on the receiver and your TV.
Press  RECEIVER to switch on.
2 Switch the TV input to the input that connects this
receiver to the TV through the corresponding composite
cable.
3 Press RECEIVER , then press HOME MENU.
The Home menu appears on your TV. Use /// and
ENTER on the remote control to navigate through the screens
and select menu items. Press RETURN to exit the current
menu.
• Press HOME MENU at any time to exit the Home menu.
4 Select the setting you want to adjust.
• Manual SP Setup
Speaker Setting – Specify the size and number of
-
speakers you've connected (see below).
X.Over – Specify which frequencies will be sent to the
-
subwoofer (page 28).
Channel Level – Adjust the overall balance of your
-
speaker system (page 28).
Speaker Distance – Specify the distance of your
-
speakers from the listening position (page 29).
• Input Assign – Specify what you've connected to the
ANALOG IN1 audio input (see The Input Assign menu on
MENU VOLUME
page 29).
• Auto Power Down – Sets to automatically turn off the
power when the receiver has not operated for several
ENTER
hours (see The Auto Power Down menu on page 29).
• HDMI Setup – Set the audio return channel function and
BAND
set the HDMI input signal to Standby Through output or
RETURN
MUTE
not during standby (see The HDMI Setup menu on
page 30).
H o me M e nu
1.Manual SP Setup
2.Input Assign
3.Auto Power Down
4.HDMI Setup
R e tu rn

Manual speaker setup

This receiver allows you to make detailed settings to optimize
the surround sound performance. You only need to make
these settings once (unless you change the placement of
your current speaker system or add new speakers).

Speaker Setting

Use this setting to specify your speaker configuration (size,
number of speakers).
1 Select 'Manual SP Setup' from the Home Menu.
2 Select 'Speaker Setting' from the Manual SP Setup
menu.
1a.Speaker Setting
1.Manual SP Setup
a.Speaker Setting Front
b.X.Over Center
Surr
c.Channel Level
d.Speaker Distance Subwoofer:
Return
3 Choose the set of speakers that you want to set then
select a speaker size.
Use / to select the size (and number) of each of the
following speakers:
• Front –Select LARGE if your front speakers reproduce
bass frequencies effectively, or if you didn't connect a
subwoofer. Select SMALL to send the bass frequencies to
the subwoofer.
• Center – Select LARGE if your center speaker reproduces
bass frequencies effectively, or select SMALL to send
bass frequencies to the other speakers or subwoofer. If
you didn't connect a center speaker, choose NO (the
center channel is sent to the other speakers).
• Surr – Select LARGE if your surround speakers reproduce
bass frequencies effectively. Select SMALL to send bass
frequencies to the other speakers or subwoofer. If you
didn't connect surround speakers choose NO (the sound
of the surround channels is sent to the other speakers).
05
05
SMALL
[ SMALL ]
[ SMALL ]
YES
Return
27
En