Playing An Ipod - Pioneer HTP-072 Operating Instructions Manual

Basic playback
• When digital input (optical or coaxial) is selected, this
receiver can only play back Dolby Digital, PCM (32 kHz to
96 kHz) and DTS (including DTS 96 kHz/24 bit) digital
signal formats. The compatible signals via the HDMI
terminals are: Dolby Digital, DTS, SACD (DSD 2ch only),
PCM (32 kHz to 192 kHz sampling frequencies), Dolby
TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD
Master Audio and DVD Audio (including 192 kHz). With
other digital signal formats, set to A (analog).
Tip
• In order to enjoy the picture and/or sound from devices
connected to each terminal, select the input by doing the following.
Video/Audio (HDMI)
DVD SAT/CBL GAME BD
IN IN
HDMI
DVD SAT/CBL GAME
Video
SAT/CBL DVD
ANTENNA VIDEO
AM LOOP
DVD IN
TUNER
SAT/CBL
IN
ANALOG IN
(CD)
FM UNBAL
75
ASSIGNABLE
MONITOR
OUT
• You may get digital noise when a LD or CD player
compatible with DTS is playing an analog signal. To
prevent noise, make the proper digital connections
(page 13) and set the signal input to C1/O1 (digital).
• Some DVD players don't output DTS signals. For more
details, refer to the instruction manual supplied with your
DVD player.
Audio Audio
1.
DVD CD SAT/CBL TV TV
Other than TV input
2.
SIGNAL SEL
C1
SIGNAL SEL
OUT
IN IN
1 1
BD
( CD ) ( TV )
ASSIGNABLE
COAXIAL OPTICAL
Audio
DVD
SIGNAL SEL
A
SAT/CBL
AUDIO SPEAKERS
R L FRONT
R L
Audio
CD
SIGNAL SEL
A
TV
1
(TV input)
O1
ASSIGNABLE
ANALOG IN1 audio
A
input terminal is
CENTER SURROUND
assigned to CD under
R L
factory settings. If you
want to change this to
TV input, please
change the settings in
the Input Assign menu
(page 29).

Playing an iPod

This receiver has a dedicated iPod/iPhone terminal that will
allow you to control playback of audio content from your iPod
using the controls of this receiver.
Important
• Pioneer cannot under any circumstances accept
responsibility for any direct or indirect loss arising from
any inconvenience or loss of recorded material resulting
from the iPod failure.
Note
• This receiver is compatible with the audio of the iPod
touch (1st/2nd/3rd/4th/5th generation), iPod classic, iPod
nano (3rd/4th/5th/6th/7th generation), iPhone 3G, iPhone
3GS, iPhone 4, iPhone 4S, iPhone 5 and iPad mini.
However, that some of the functions may be restricted for
some models.
• This receiver has been developed and tested for the
software version of iPod/iPhone indicated on the website
of Pioneer (http://pioneer.jp/homeav/support/ios/na/).
• Installing software versions other than indicated on the
website of Pioneer to your iPod/iPhone may result in
incompatibility with this receiver.
• iPod and iPhone are licensed for reproduction of
noncopyrighted materials or materials the user is legally
permitted to reproduce.
• Features such as the equalizer cannot be controlled using
this receiver, and we recommend switching the equalizer
off before connecting.
• No sound will come from the headphone even when the
headphone is connected to the PHONES jack, when the
iPod is connected.
• Make sure the receiver is in standby when disconnecting
the iPod/iPhone.
1 Switch on the receiver and your TV.
See Connecting an iPod on page 16.
2 Switch the TV input so that it connects to the receiver.
• Switch the TV input to the input that connects this
receiver to the TV through the corresponding composite
cable.
03
03
19
En