RocketFish RF-TVMP20 Manual page 7

RF-TVMP20 TV Wall Mount
STEP 3: Option 1- Attaching the arm assembly without the adapters
1 Align the arm assembly (B) with the screw holes on the back of the TV.
2 Install screws (M-A, M-B, or M-C) securely into the four holes in the back of the TV. Do not over-tighten.
Note: The arm assembly (B) should be level on the back of the TV. Proceed to Step 4 Determine wall mount location.
You'll need
OR
M-A (4)
Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
75 x 75mm
100 x 100mm
B
OR
M-A M-B
Screws
OR
M-B (4)
M-C (4)
100mm (3-15/16")
75mm (2-15/16")
TV
OR
M-C
Level
Phillips screwdriver
B Arm assembly
7