Installation Instructions - RocketFish RF-TVMP20 Manual

Tv wall mount

Hide thumbs Also See for RF-TVMP20:

RF-TVMP20 TV Wall Mount

Installation instructions

STEP 1- Select screws

Select the screws for your TV. A limited number of TVs come with mounting hardware included. (If there are

screws that came with the TV, they are usually in the holes on the back of the TV.) If you don't know the

correct diameter of the mounting screws your TV requires, test various sizes by hand threading the screws.

Select one of the following types of screws:

NOTE: For Samsung TVs with size M8 mounting holes, use the hardware included in the Adapter Kit. Follow the

instructions printed on the Adapter Kit bag to install the hardware.

To avoid potential personal injuries and property damage, make sure that there are adequate

CAUTION:

threads to secure the brackets to your TV. If you encounter resistance, stop immediately and contact

customer service. Using hardware that is too long may damage your TV. However, using a screw that is

too short may cause your TV to fall from the mount.

Screw is

too short

too long

Remove the screws.

Need help? Call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

M4 × 12 mm screws (M-A)

M5 × 12 mm screws (M-B)

M6 × 12 mm screws (M-C)

Screw fits

correctly

Table of Contents