Transferring The Phone Book - Pioneer AVIC-F30BT Operation Manual

Chapter
Using hands-free phoning
12
2 Touch
The call ends.
p You may hear a noise when you hang up
the phone.
# If you touch [Vol –] or [Vol +], you can adjust
the volume when talking.
# If you touch [Close Menu], the operation
menu during call is minimised.
To display the menu again, touch

Transferring the phone book

You can transfer the phone book entries from
your mobile phone to the phone book of the
navigation system.
p Depending on the mobile phone, phone
book may be called Contacts, Business
Card or something else.
p With some mobile phones, it may not be
possible to transfer the entire phone book
at once. In this case, transfer addresses
one at a time from your phone book using
your mobile phone.
p If you connect the mobile phone featuring
auto-synchronisation function, phone book
transfer or synchronisation will be automa-
tically performed.
64
Engb
to end the call.
.
p A maximum of 1 000 entries can be trans-
ferred per mobile phone. If the entries ex-
ceed 1 000, the extra entries will not be
transferred. If more than one number is re-
gistered for one person, such as work place
and home, each number may be counted
separately.
p Each entry can hold up to 5 phone num-
bers.
p Depending on the mobile phone that is
connected to this navigation system via
Bluetooth technology, this navigation sys-
tem may not be able to display the phone
book correctly. (Some characters may be
garbled.)
p If the phone book in the mobile phone con-
tains image data, the phone book may not
be correctly transferred.
p The transferred data cannot be edited on
the navigation system.
1 Connect the mobile phone that has the
phone book to transfer.
= For details, refer to Connecting a registered
Bluetooth device manually on page 58.
2 Touch [Contacts Transfer] on the
"Phone Menu" screen.
3 Check that the following screen is dis-
played, and operate your mobile phone to
transfer the phone book entries.
When data transfer is finished, a message ask-
ing whether you want to transfer more data
appears.
Touch [Yes] to continue the transfer.