Correcting The Current Location; Changing The Eco-Function Setting - Pioneer AVIC-F30BT Operation Manual

Customising preferences
1 Display the "Navi Settings" screen.
= For details, refer to Displaying the screen for
navigation settings on page 126.
2 Touch [Set Home].
The "Set Home" screen appears.
3 Touch [Home].
The "Select Search Method" screen appears.
# If you touch [Phone#], you can edit your
home phone number.
p [Phone#] is only available when you have
already registered your home phone num-
ber.
4 Search for a location.
= For details, refer to Chapter 6.
After searching for a point, the map of the se-
lected position is displayed.
5 Touch [OK].
The location is registered, and then the "Set
Home" screen appears.
6 Touch [OK].
The registration is complete.

Correcting the current location

Touch the screen to adjust the current position
and direction of the vehicle displayed on the
map.
1 Display the "Navi Settings" screen.
= For details, refer to Displaying the screen for
navigation settings on page 126.
2 Touch [Modify Current Location].
3 Scroll to the position where you want
to set, then touch [OK].
4 Touch the arrow key on the screen to
set the direction, then touch [OK].
Changing the eco-function
setting
You can change the eco-function setting.
1 Display the "Navi Settings" screen.
= For details, refer to Displaying the screen for
navigation settings on page 126.
2 Touch [Eco Settings].
The "Eco Settings" screen appears.
3 Touch each item.
Eco Score
! On (default):
Displays "Eco Score".
! Off:
Hides "Eco Score".
= For details, refer to Checking the eco-friendly
driving status on page 32.
Eco Drive Level
! On (default):
After you arrive the destination, a message
appears and a beep sounds if the level of
"Eco Drive Level" have increased or de-
creased.
! Off:
No message appears and no sound beeps
when the vehicle reaches the destination.
= For details, refer to Displaying Eco Drive
Level guidance on page 33.
Rapid Start Warning
Chapter
26
131
Engb