Displaying The Customised Pois; Changing The View Mode; Setting The Map Colour Change Between Day And Night - Pioneer AVIC-F30BT Operation Manual

Customising preferences

Displaying the customised POIs

Creating a customised POI is possible by
using the utility programme NavGate FEEDS
which is available separately, on your PC.
(NavGate FEEDS will be available on our web-
site.) Storing the customised POI properly and
inserting the SD memory card enables the sys-
tem to display the icons on the map screen.
p You can select up to 10 items from the sub-
categories or detailed categories.
1 Insert an SD memory card into the SD
card slot.
= For details of the operation, refer to Insert-
ing and ejecting an SD memory card on
page 17.
2 Display the "Map Settings" screen.
= For details, refer to Displaying the screen for
map settings on page 132.
3 Touch [Overlay POI].
The "Overlay POI" screen appears.
4 Touch [Display] to change the setting to
"On".
p If you do not want to display the POI icon
on the map, touch [Display] to turn it
"Off". (Even if "Display" is turned "Off",
the POI selection setting is retained.)
5 Touch [Custom POI].
The list of POI categories appears.
6 Touch the items you want to display.
7 To finish the selection, touch [OK].

Changing the view mode

Various types of screen displays can be se-
lected for navigation guidance.
= For details of the operation, refer to Switch-
ing the view mode on page 30.
Setting the map colour change
between day and night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map colour.
1 Display the "Map Settings" screen.
= For details, refer to Displaying the screen for
map settings on page 132.
2 Touch [Day/Night Display].
Each time you touch the key changes the set-
ting.
! Automatic (default):
You can change the colours of a map be-
tween daytime and nighttime according to
whether the vehicle lights are on or off.
! Day:
The map is always displayed with daytime
colours.
p To use this function with "Automatic", the
orange/white lead of the navigation system
must be connected correctly.
Chapter
26
137
Engb