Basic Wireless Settings - TRENDnet TEW-733GR User Manual

TRENDnet User's Guide
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.
5. You will receive a success message indicate that the wireless device successfully
connected using WPS.
PIN (Personal Identification Number)
Wireless >WiFi Protected Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see
on page 22).
2. Click on Wireless, and click on WPS.
3. To add a wireless device to your network, simply click Connect under Add Wireless
Station to begin WPS.
© Copyright 2012 TRENDnet. All Rights Reserved.
"Access your router management page"
4. You will receive an option of Auto and Manual. Select Auto and click Next to continue
with WPS.
5. Select PIN option and enter your wireless device's PIN information. Click Next to
continue.

Basic wireless settings

Wireless > Basic
This section outlines available management options under the Basic Wireless sub tab.
1. Log into your router management page (see
on page 22).
2. Click on Wireless, and click on Basic.
3. To save changes to this section, click Save Settings when finished.
TEW-733GR
"Access your router management page"
16