Recording With Manual Focus - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Recording
4
Recording
(Advanced)
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use manual focus.
¬ Change the mode to
Press the FOCUS button.
≥ MF appears on the screen.
A Rotate the multi manual ring to adjust the focus.
1
(When MF assist function is used)
Select the menu. (l 33)
[RECORD SETUP] # [MF ASSIST] # [ON]
≥ It is possible to set from the quick menu.
(l 34)
≥ This function's default setting is [ON].
2
Adjust the focus by rotating the
ring.
MF MF
The center of the screen is enlarged. The normal
screen returns approximately 2 seconds after
you finish bringing the subject into focus.
≥ The center of the screen is not enlarged when
[MF ASSIST] is [OFF].
≥ Press the FOCUS button again to restore to
auto focus.

Recording with manual focus

.
or
≥ Zoom operation cannot be performed using the
≥ MF Assist does not work when the Digital
≥ The part of the screen that is enlarged is not
multi manual ring.
Zoom is used.
enlarged on the image actually recorded.
FOCUS
85
VQT1Z09