Dividing A Scene To Partially Delete - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Playback
2
Editing
To delete an unnecessary portion of a scene, first divide the scene and then delete the unnecessary
portion.
¬Change the mode to
1
Touch the Play Mode select icon
to select the desired media to
divide a scene.
2
Select the menu. (l 33)
[EDIT SCENE] # [DIVIDE] # [SET]
3
Touch the scene to be divided.
4
Touch to set the dividing
point.
0h00m00s 0h00m00s 0h00m00s
≥ Using slow-motion playback or frame-by-frame
playback makes it easy to search for the point
where you want to divide the scene. (l 88)
≥ When the confirmation message appears,
touch [YES].
≥ Touch [YES] to continue dividing the same
scene. To continue dividing other scenes,
touch [NO] and repeat steps 3-4.
5
Press the MENU button to
complete dividing.
Dividing a scene to partially
delete
.
l 87
( )
6
Delete the unnecessary scene.
(l 97)
To delete all the divided points
[DIVIDE] # [CANCEL ALL]
≥ When the confirmation message appears,
touch [YES].
≥ All divided points set on this unit will be
canceled.
≥ The scenes that were deleted after division
cannot be recovered.
≥ When [INTEL. SCENE] is selected, scenes
cannot be divided.
≥ Scenes cannot be divided if the number of
scenes played back on a selected date has
reached 99.
≥ It may not be possible to divide scenes with a
short recording time.
≥ Data that has been recorded or edited on
another device cannot be divided and the
divided points cannot be deleted.
99
VQT1Z09