Recording Manually By Setting White Balance, Shutter Speed Or Iris Adjustment - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Recording
3
Recording
(Advanced)
The operation sequence differs for the LCD monitor and viewfinder.
¬ Change the mode to
Press the FUNCTION button.
≥
appears on the screen.
MNL
A When using the viewfinder, rotate the multi manual ring to set it.
∫ When using the LCD monitor
1
Touch the desired item to be set.
F
WB SHTR
2
Touch /
1/100 1/100 100
F
WB SHTR
≥ Press the FUNCTION button again to cancel
manual setting.
≥ Rotate the multi manual ring to operate the zoom.
≥ The manual icon appears or disappears each
time is touched.
F
F
82
VQT1Z09
Recording manually by setting white
balance, shutter speed or iris adjustment
or .
FUNCTION
IRIS
to enter the selection.
IRIS
F
WB
SHTR
White balance (l 83)
WB
Manual shutter speed (l 84)
SHTR
Aperture adjustment (l 84)
IRIS
∫ When using the viewfinder
1
Press the FUNCTION button to
select the desired item.
≥ Selected item changes whenever the
FUNCTION button is pressed.
2
Set it by rotating the multi
manual ring.
1/100 1/100 1/100
WB SHTR
≥ It will switch as following when the
selected and multi manual ring is rotated. Press
the FUNCTION button to enter the selection.
[ENTER]: Setting is completed and manual
icon will disappear.
[RETRY]: Setting will be done again.
[CANCEL]: Cancels the manual setting.
≥ Zoom operation cannot be done using the multi
manual ring during setting.
IRIS
IRIS
is