Selecting A Mode (Turning The Unit On/Off) - Panasonic HDCTM300 - HD SD CAMCORDER Operating Instructions Manual

Preparation
3
Setup
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to
the lock release button A.
HDC-TM300
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with B.
≥ Status indicator C
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator goes off.
OFF
30
VQT1Z09
Selecting a mode
(Turning the unit on/off)
Motion Picture Recording Mode (l 51)
Still Picture Recording Mode (l 55)
Playback Mode (l 87, 94)
, or
HDC-HS300
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with B.
≥ Status indicator C
while pressing