H Long-Period Continuous Shooting; Increasing Monitor Brightness - FujiFilm FinePix FinePix S9600 Owner's Manual

f CONTINUOUS SHOOTING
PHOTOGRAPHY FUNCTIONS

h Long-period continuous shooting

Available Photography modes: B, √, À, U, ,, /
N N N 6 6
◆
Focusing on a moving subject
If you press the shutter button down halfway to focus on the subject at the starting point A, the subject
may no longer be in focus when it reaches point B where you want to take the shot.
In such situations, focus on point B beforehand and then lock the focus so that it does not shift.
This feature is also useful for photographing fast-moving subjects that are difficult to focus on.
Focus on and the focus is wrong at
Starting point
◆
Continuous shooting and flash
When a Continuous shooting mode is selected, the flash mode is forcibly set to "
However, when the mode is changed back to normal photography, the flash setting specified before
continuous shooting was selected is restored.
56
This mode allows you to take up to 40 continuous
shots (max. 1.1 frames/sec.).
●
!
Long-period continuous shooting cannot be used in the "
" M " , " < ", " > " and " r " modes.
●
!
Only 1 frame can be shot when using the Long-period
continuous shooting mode and Self-timer mode together.
●
!
Continuous shooting mode and assist window (➡P.30) can
be used together.
◆
. Focus on and lock the focus.
Point where you want to take the picture
FAR NEAR
◆
v
" Suppressed flash.
PHOTOGRAPHY FUNCTIONS

INCREASING MONITOR BRIGHTNESS

This is useful when checking the shot composition for outdoor scenes.
1
N ",
2
3
1 0
500 F2 8 500 500 500 F2 8 F2 8 F2 8
Available Photography modes: B, √, À,
U, ,, /, N, M, <, >
Set the Power switch to "
Set the Mode dial to Photography mode.
1 Hold down the " D
" button.
0 2
2 Press the "DISP/BACK" button.
" " appears on the screen and the subject is
displayed brightly.
To cancel increased brightness:
D
1 Hold down the " " button.
N N N 6 6
ISO 200 ISO 200 ISO 200 2 Press the "DISP/BACK" button again.
This function is automatically canceled after each
shot.
●
!
When this function is active, it will increase the amount of
speckling in images on the screen. This is normal and does
not affect the photographed image.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
!
Even if you increase the brightness in low-light conditions,
you cannot check the subject.
●
!
The color tones may vary depending on the subjects.
q
".
3
57