Haf Mode; Ôflash Brightness Adjustment; Sharpness - FujiFilm FinePix FinePix S9600 Owner's Manual

PHOTOGRAPHY MENU
PHOTOGRAPHY MENU
H AF MODE
AF MODE AF MODE
:
OFF OFF
1 :
AUTO AUTO
: OFF OFF
:
2
: 0
: SET SET
N N N 6 6
ISO 200 ISO 200 ISO 200
320 320 320 320 F5 F5.6 F5.6 F5.6
N N N 6 6
ISO 200 ISO 200 ISO 200
320 320 320 F5 F5.6 320 F5.6 F5.6
320 320 320 F5 F5.6 320 F5.6 F5.6
320 320 F5 F5.6 320 320 F5.6 F5.6
320 320 320 320 F5 F5.6 F5.6 F5.6
68
✽ Displaying the menus (➡P.63)
Available Photography modes: N, M, <, >
Ï CENTER
˝ MULTI
Ë AREA
The AF mode can only be selected when the focus
mode is S-AF (➡P.23).
Ï CENTER
The camera focuses on the center of the screen.
Use this setting when taking pictures using AF/AE
lock (➡P.28).
˝ MULTI
Press the shutter button down halfway. The camera
recognizes any strongly contrasting subject near
the center of the screen and displays the AF frame
over the subject in focus.
●
!
When taking pictures in Macro mode, the camera focuses on
the center of the screen.
For a high-contrast subject in
the center of the screen
Press the shutter button down halfway. The AF
frame appears positioned on the high-contrast
subject near the center of the image.
When there is no high-contrast
subject in the center of the screen
When the camera has difficulty focusing on the
subject in "MULTI" mode, set the AF mode to
"CENTER" and use AF/AE Lock (➡P.28).
1
1 0 3 0 0 2
SELECT AF AREA SELECT AF AREA
Before moving
After moving
2
N N N 6 6
ISO 200 ISO 200 ISO 200
320 320 320 320 F5 F5.6 F5.6 F5.6
Regardless of the AF frame location, the exposure is always set using the area in the center of the
screen. To expose the shot for your main subject, use AE lock.
Ô FLASH BRIGHTNESS ADJUSTMENT
FLASH FLASH
: OFF OFF
1 : 2 2
AUTO AUTO
3 3
: OFF OFF 1 1
3 3
:
0
2
: 1 1
0
3 3
2 2
: SET SET
3 3
G SHARPNESS

SHARPNESS

SHARPNESS
: HARD HARD
STD STD
1
: STD STD STD STD
:
STD STD SOFT SOFT
1 3
: EV EV
2
:
OFF OFF
: OFF OFF
Ë AREA
The camera changes the focusing position on the
screen. Use this setting when composing the shot
using a tripod and changing the focusing position.
1 Hold down the " —
" button.
°
2 Press "a", "b", "d" or "c" to move the " " (target
point) to the focusing position.
—
3 Release the " " button.
The AF frame appears in the location to which the
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, repeat step 1 .
Available Photography modes: N, M, <, >
Use this setting to change the amount of light
emitted by the flash to suit the photography
conditions or to achieve a desired effect.
h Compensation range:
–2/3 EV to +2/3 EV in approx. 1/3 EV increments
(total: 5 levels selectable)
See P.151 for information on EVs.
●
!
Depending on the type of subject and the shooting distance,
brightness adjustment may have no effect.
●
!
The image may appear dark when setting the shutter speed
to higher than 1/1000 sec.
Available Photography modes: N, M, <, >
Use this setting to soften or emphasize outlines or
to adjust the quality of the image.
HARD: Emphasizes the outlines.
Best for shots of subjects such as buildings
or text where sharp images are desirable.
STANDARD: Best for ordinary photography.
Provides edge sharpness that is ideal
for most picture taking situations.
SOFT: Softens the outlines.
Best for shots of subjects such as people,
where a softer image is desirable.
3
69