Software Requirements; Prerequisites - Dell Active Fabric Manager Installation Manual

Software Requirements

Table 3. Software Requirements for Linux CentOS
Software Notes
Linux CentOS 5.7 Linux CentOS requires administrator permission on the target server. Make sure that you have
and 5.8 permission on the network service account to modify the system temp directory. For Linux
CentOS, the temp directory is temp /tmp.
Internet Explorer 9
Chrome 18 and
higher
Firefox 12 and 13
Table 4. Software Requirements for Windows 7
Software Notes
Windows 7 Windows requires administrator permission on the target server. Make sure that you have
permission on the network service account to modify the system temp directory. For Windows,
the temp directory is (%systemroot%\temp)
Internet Explorer 9
Chrome 18 and
higher
Firefox 12 and 13

Prerequisites

Before you begin, gather the following information:
• Telnet credentials.
• Syslog IP address–Use this address to store the syslog messages.
• TFTP server address–Use this address to load the Dell Force10 operating software (FTOS) software images and
configuration files during bare metal provisioning (BMP).
• Password for DFM superuser.
• Simple network management protocol (SNMP) read and write community strings.
6