The Switch Telnet Credentials creates a user on the switches so that you can remotely make configuration
changes to the switches in the distributed core. The privilege level is set to 15 and is a read-only field. By default,
the installer uses the following switch credential information:
–
default username—admin
–
password— admin
–
enable password— force10
13. From the Protocol pull-down menu, select one of the following protocols: Telnet, SSHv2, or Telnet & SSHv2.
14. Click the Next button.
The Port Configuration Information screen displays.
15. Enter the port number for the web servers and database server:
a) In the Web Server Port for (http) field; enter the HTTP web server port. The default value is 80
b) In the Web Server Port for (https); enter the HTTPS web server port. The default value is 443.
10