Table of Contents
Advertisement
4. Clip-mount
Clip the UBR243 on ledges and shelves.
1. Press the mounting clip as shown.
2. Place the unit over the mounting surface and release.
3. Adjust the camera as needed.
Connect Power
1. Insert the AC adapter power plug into the camera's DC
adapter input jack.
2. Plug the other end into a 120 volt AC (standard indoor) power outlet or surge protector. The
red charging LED turns on.
3. Press
. The green power LED turns on and the monitor now displays camera video. If it
PoWer
doesn't, try reconnecting the AC adapter, making sure the power outlet isn't controlled by a
wall switch.
11
Advertisement
Table of Contents
