Brother QL-570VM - B/W Direct Thermal Printer User Manual page 58

5
Administrator Mode
Specifying the layout for visitor badges and parking permits
If 2 or 4, described in Step 2 were clicked, a dialog box for selecting a layout
appears.
1 Select "Standard Name Badges", "Generic Badges" or "Photo Badges" as
2 Displays images of the layouts in the selected category. Select the image
3 Click the [OK] button.
58
1
2
the layout category for visitor badges. The "My Badge" category is created
when new badges are created. Newly created badges are saved in the "My
Badge" category (Select Badge Layout dialog box only). (page 103)
of the layout to be used for visitor badges by clicking the desired layout.
NOTE
• If a layout from the "Photo Badges" category is selected, but no photo was
taken, a sample image is printed in the photo area. If a layout from the
"Photo Badges" category has been selected, be sure to take a photo.
• In Self Check-in mode, photos cannot be taken. If Self Check-in mode is
to be used, select a layout from a category other than the "Photo Badges"
category.
Select Badge Layout dialog box