Brother QL-570VM - B/W Direct Thermal Printer User Manual page 18

1
Introduction
• If a label is removed after begin applied to a surface, some portion of the
• Some DK Rolls use permanent adhesive for their labels. These labels
• Prior to using CD/DVD labels, be sure to follow the instructions in your CD/
• Do not use CD/DVD labels in a slot loading CD/DVD player, for example a
• Do not peel off the CD/DVD label once it is applied to the CD/DVD, a thin
• Do not apply CD/DVD labels to CD/DVD disks designed for use with ink jet
• When applying CD/DVD labels, use the applicator included with the CD/
• User's shall take full responsibility for applying CD/DVD labels. Brother
CD-ROM and Software
• Do not scratch or subject the CD-ROM to high or low temperatures.
• Do not put heavy objects on the CD-ROM or apply force to the CD-ROM.
• The software contained on the CD-ROM is meant for use with the machine
When you handle personal information, comply with relevant
laws or guidelines in your country.
18
label may remain. Remove the remaining portion before attaching a new
label.
cannot be easily peeled off once attached.
DVD player's instruction guide regarding applying CD/DVD labels.
CD player in a car where the CD is slid into a slot in the CD player.
surface layer may come off, resulting in damage to the disk.
printers. Labels peel off these disks easily and using disks with peeled labels
can result in loss or damage of data.
DVD label rolls. Failure to do so could cause damage to the CD/DVD player.
accepts no responsibility for any loss or damage of data caused by the
inappropriate use of CD/DVD labels.
only. See the License on the CD for details. This software may be installed
on multiple computers for use in an office, etc.