Cannot Connect To The Network - Canon Color imageCLASS MF8280Cw Settings Manual

Troubleshooting

Cannot Connect to the Network

Check the following items to make sure that the machine is ready to be connected to a network.
1
2
3
4
Proceed to the next page if you still cannot connect the machine to the network.
18
Check the status of the computer.
• Have the settings for the computer and the wireless router been completed?
• Are the cables (power cable or network cables) for the wireless router connected properly?
• Is the wireless router turned ON?
If you cannot connect to the network even after checking:
• Turn OFF each device and turn each one back ON.
• Wait a few moments, and reconnect to the network.
Check if the machine is turned ON.
• When the power is already turned ON, turn the power OFF and turn it back ON.
Check the installation sites for the machine and the wireless router.
• Is the distance between the machine and the wireless router close enough to
communicate?
• Isn't there any obstacle, such as a wall, between the machine and the wireless router?
• Isn't there any electronic device, such as a microwave or a digital cordless phone, that
emits electronic wave?
Wireless Router
Specify the settings again.
"Setting via WPS" (P. 4)
"Setting by Selecting the SSID (Network or Access Point)" (P.6)
Within 164' (50 m)
The machine