Canon Color imageCLASS MF8280Cw Settings Manual page 8

Setting the Wireless LAN

• After the <Connected.> screen is displayed,
wait until the Wi-Fi indicator stops blinking
and turns on.
Wait approximately 2 minutes
after the connection is completed.
The IP address is set during this time period.
Proceed to P. 9
When an error message appears:
Press [OK] to close the screen, check whether the
network key is correct or not, and then retry the
settings from step .
5
If the access point cannot be detected even after
retrying, see the following.
"When an Error Message Appears" (P.14)
When setting IP address manually:
"Setting IP Addresses" in the e-Manual
8