Ihow To Specify Print Options (Dpof); Idpof Set Frame - FujiFilm FinePix F401 Owner's Manual

i HOW TO SPECIFY PRINT OPTIONS ( DPOF )
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
SmartMedia. The recorded specifications include information on which frames are to be
printed.
This section gives a detailed description of how to order your prints with the FinePix F401.
On the FinePix F401, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
©
ø
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
(➡P.70)
If you load a SmartMedia that contains frames specified for printing on another camera,
those print specifications are all reset and replaced by the new print specifications.
™
(➡P.99)
Up to 999 frames can be specified on the same SmartMedia.
66
(➡P.60)
i DPOF SET FRAME
PLAYBACK MENU
1
1 0
1Set the Mode switch to " Q ".
2Press the "MENU/OK" button to display the
menu screen.
2
2 0
ＤＰＯＦ ＤＰＯＦ
ＯＫ ＯＫ
ＤＡＴＥ ＯＦＦ ＤＡＴＥ ＯＦＦ
Use "g" to select " i " DPOF.
Continued on next page...
4
67