Switching On And Off Setting The Date And Time; Changing The Date And Time - FujiFilm FinePix F401 Owner's Manual

SWITCHING ON AND OFF SETTING THE DATE AND TIME
•
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
２００２ ２００２ ． １ ． １ ． １ ． １
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
0 1
1 Use "d" and "c" to select Year, Month, Day,
Hour or Minute.
2 Press " P (a)" or " { (b)" to set the number.
G
!
If you hold down "a( P )" or "b( { )", the numbers
change continuously.
G
!
When the time displayed passes "12:00", the AM/PM
16
setting automatically switches.
4
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
２００２ ２００２ ． ． ４ ． ． ２２ ２２
０４ ： ２２ ０４ ： ２２ ＡＭ ＡＭ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
0 2
Once you have set the date and time, press the
"MENU/OK" button. Pressing the "MENU/OK"
button switches the camera to Photography or
Playback mode.
G
!
To set the time, press the "MENU/OK" button when the time
is at zero seconds.
G
!
If at least 2 hours have passed since the AC power
adapter was connected or the battery inserted and the
date and time set, then those settings will be maintained
for roughly 5 hours even when the camera has no power
supply (when the AC power adapter is disconnected and
the battery is removed).

Changing the date and time

ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
P O S T V I E W P O S T V I E W ＯＮ ＯＮ
ＰＯＷＥＲ ＳＡＶＥ ＰＯＷＥＲ ＳＡＶＥ ２ ＭＩＮ ２ ＭＩＮ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ ＤＳＣ ＤＳＣ
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＳＥＴ
ＯＫ ＯＫ ＢＡＣＫ ＢＡＣＫ
1 0 3 0 2 0
To change the date and time:
1 Press the "MENU/OK" button.
2 Use "d" or "c" to select "
g " OPTION and then
P {
use " (a)" or " (b)" to select "SET–UP".
3 Press the "MENU/OK" button.
4 Select "DATE/TIME" and press "c".
See P.16 for information on setting the date and
time.
N
Checking the remaining battery charge
Switch the camera on and check that no battery
level warning ( Z , X or C ) is displayed on
the LCD monitor. If no icon is displayed, there is
ample charge left in the battery.
i
Z Lit white:
The battery is approximately half charged.
i X Lit red:
Battery charge low. Replace or recharge the
battery as it will run out shortly.
i C
Blinking red:
The battery is exhausted. The display will shortly
go blank and the camera will stop working.
4 0
Replace or recharge the battery.
G
!
The above estimates are for the photography modes.
In Playback mode, the transition from "
may take less time.
N N
Power Save Function
If the camera is not used in any way for approx. 30
seconds when the camera functions are enabled, this
function temporarily switches features such as the LCD
monitor off to reduce power consumption (➡P.80). If
the camera is then left unused for a further period (2
minutes or 5 minutes), the Power Save function
automatically switches the camera off. To switch the
camera back on, slide the Power switch to the side to
turn the camera off briefly and then turn it back on.
N
1
Z " to " C "
17