Tcontinuous Shooting - FujiFilm FinePix F401 Owner's Manual

= SELF-TIMER PHOTOGRAPHY
PHOTOGRAPHY MENU
3
The self timer lamp lights for 5 seconds and then
starts flashing. 5 seconds later the camera
makes a clicking noise and takes the picture.
G
!
To stop the self-timer once it has started running,
46
press the "BACK" button.
4
７
１／５００ Ｆ５．６ １／５００ Ｆ５．６
Until the picture is taken, a countdown appears
on the LCD monitor.
Self-timer mode is automatically cancelled after
each shot.
t CONTINUOUS SHOOTING
PHOTOGRAPHY MENU
1
ＣＯＮＴ． ＣＯＮＴ．
ＦＩＮＡＬ ４ ＦＩＮＡＬ ４
ＴＯＰ ４ ＴＯＰ ４
ＯＦＦ ＯＦＦ
This mode can be selected in the " | ", " W
image modes.
Select the continuous shooting mode you want
to use.
See P.48 for more information on continuous
shooting modes.
G
!
" ¨ " appears on the LCD monitor during
shooting.
G
!
You cannot use the flash in this mode.
G
!
The speed of continuous shooting remains the same
regardless of the resolution setting.
G
!
The shots should be taken using the viewfinder.
G
!
The results of the shot are displayed even when
"POSTVIEW" is set to OFF (➡P.79).
G
!
The time required to record a file is approximately
8 seconds in " 1 " mode (for TOP or FINAL 4-frame
continuous shooting).
✽ Displaying the menus (➡P.42)
2
４９ ４９
" still
When Top 4-frame continuous shooting is set to
ON, the " t " icon appears on the LCD monitor.
When Final 4-frame continuous shooting is set
to ON, " } " appears on the LCD monitor.
Continuous shooting continues while the shutter
button is pressed down fully.
G
!
The focus and exposure are determined for the first
frame and cannot be changed during shooting.
G
!
If there is insufficient available space on the
SmartMedia to take the maximum number of
continuous shots, the number of shots that can be
recorded is taken.
Continued on next page...
４９ ４９
3
47