Display Messages - Yamaha DTX900M Owner's Manual

Display Messages

LCD
Are you sure?
Can't play SMF Format 1 data.
Choose user song.
Click stored.
Completed.
Connecting USB device...
Copy protected.
USB device full.
USB device not ready.
USB device read/write error.
USB device write protected.
Executing...
File already exists.
File not found.
Folder is not empty.
Folder is too deep.
Illegal file.
Illegal file name.
Illegal input.
Illegal sample data.
Illegal selection.
Illegal song number.
Illegal track number.
Incompatible USB device.
Invalid USB device.
MIDI buffer full.
MIDI data error.
No data.
No DIMM memory installed.
No response from USB device.
No sample data.
Now loading... (xxxx)
Now saving... (xxxx)
Now scanning autoloaded files.
Now working...
Overwrite? [YES]/[NO]
Confirms whether you want to execute a specified operation or not.
This message appears when you select and start the song with the SMF format 1 on the USB storage
device. Convert the song to the SMF format 0, then play it again, since the DTX900 can handle only
SMF format 0 song data.
This message appears when you press the [F2] JOB button in the Song mode with a Preset Song
selected. When you want to call up the Job display, select a User Song.
The settings in the Click mode have been stored.
This appears when an operation such as Load, Save, Format and other Job has been completed.
The DTX900 is currently recognizing the USB storage device connected to the USB TO DEVICE termi-
nal.
You have attempted to export or save a copy-protected digital audio source.
The USB storage device is full and no more data can be saved. Use a new USB storage device, or
make space by erasing unwanted data from the storage device.
A USB storage device is not properly inserted in or connected to the DTX900.
An error occurred while reading or writing to/from a USB storage device.
A USB storage device is write protected, or you have attempted to write to a read-only medium such
as CD-ROM.
A format operation or Job is being executed.
A file having the same name as the one you are about to save already exists.
The specified file was not found on the external USB storage device during a Load operation.
You have attempted to delete a folder that contains data.
Directories below this level cannot be accessed.
The file specified for loading is unusable by the DTX900 or cannot be loaded in the current mode.
The specified file name is invalid. Try entering a different name.
An invalid input or value has been specified. Check the input method or value.
The sample file specified for loading is unusable by the DTX900.
An unacceptable file has been specified in the Song job mode.
An unacceptable song number has been specified in the Song job mode. Select the song again.
An unacceptable track number has been specified in the Song job mode. Select the track again.
A USB device which cannot be used with the DTX900 has been connected to the USB TO DEVICE
connector.
The USB storage device is unusable. Format the USB storage device and try again.
Failed to process the MIDI data because too much data was received at one time.
An error occurred when receiving MIDI data.
When a Song Job was executed, the selected track or range contained no data. Select an appropriate
track or range.
An appropriate pair of expansion DIMMs has not been properly installed, or the pair is not properly
matched.
There is no response from the USB device connected to the USB TO DEVICE terminal.
This message appears when a Sample-related Job cannot be executed because the specified Sample
is not available.
Indicates that a file is being loaded.
Indicates that a file is being saved.
The DTX900 is currently scanning for the files specified for Auto Load.
The DTX900 is currently executing the memory arrangement after you have finished Sampling or have
cancelled the Load/Save operation by pressing the [EXIT] button.
This message appears when the Save operation in the File mode will overwrite data on the USB stor-
age device or the Sampling operation will overwrite the User Voice containing data. This message
prompts you to confirm whether it is OK to continue the operation or not.
Description
DTX900 Owner's Manual
Appendix
153