Appendix; Display Messages - Yamaha P-255 Owner's Manual

Appendix

Message
The digital piano is being restored to its default settings—that is, the settings from when it was first turned on.
NOTICE
CLr
• You should never turn off the digital piano while the message "Clr" is shown on the display. Failure to observe this
precaution may result in all song data (page 21), including Import Songs, being deleted.
The digital piano has been connected to a computer and is being used with an application. You will not be able to
con
operate the instrument while this message is being shown.
The character-code setting (page 47) is not suitable for the name of the song file you have selected. Try changing the
character code.
The song cannot be selected because the data format is not supported by your digital piano or there is a problem with
the data itself.
E01
No USB flash drive can be found or there is a problem with the one currently connected. Plug the USB flash drive out
and back in, and then repeat the operation you had been attempting. If this message appears frequently in the
absence of other problems, the USB flash drive may be broken.
Backup data cannot be loaded, no backup data is available, or the backup data has been corrupted.
E02
The USB flash drive is write protected.
E03
The USB flash drive is nearly full or the number of files and/or folders is more than supported.
Playback or recording of an audio song ended in failure. If you are using a USB flash drive that has had data recorded
E04
and deleted multiple times, first ensure that it contains no irreplaceable data, format the flash drive (page 33), and
then plug it out and back in.
EEE
There is a problem with the digital piano. Contact your nearest Yamaha dealer or authorized distributor for assistance.
End
The selected operation has been completed.
The digital piano's internal memory or the USB flash drive is nearly full. Delete any unnecessary files (page 33) to free
Enp
up some memory before starting to record.
The digital piano's internal memory was formatted because it was turned off while performing an operation. The
instrument's settings and any songs recorded or saved on it have been lost.
FCL
NOTICE
• You should never turn off the digital piano while the message "FCL " is shown on the display.
For
The USB flash drive is about to be formatted.
The operation could not be completed because the digital piano's internal memory or the USB flash drive is nearly
FUL
full. If this message is shown while recording, your performance data may not be correctly saved.
n Y
This message is shown to confirm whether or not you wish to proceed.
n~Y
This message is shown to confirm whether or not you wish to overwrite or delete data or to format a USB flash drive.
The selected song is protected or read-only; therefore, its data cannot be deleted or overwritten. If you need to modify
Pro
a read-only file, use a computer to remove the read-only restriction.
The connected USB flash drive has not been correctly formatted. Ensure that the flash drive contains no irreplaceable
UnF
data and then format it (page 33).
Connection with the USB flash drive was terminated due to abnormal electric current. Unplug the USB flash drive
Uoc
from the [USB TO DEVICE] terminal and then turn the digital piano off and back on.
Communication cannot be established with the USB flash drive. Unplug the flash drive and then plug it back in. If this
UU1
message is shown despite the USB flash drive having been correctly connected, the flash drive may be broken.
The connected USB flash drive cannot be used with your digital piano or the number of connected flash drives
UU2
exceeds the supported limit. Refer to the section "Working with USB flash drives" (page 30).
---
The control panel is locked (page 18). To unlock it, press the [EFFECT] and [SOUND BOOST] buttons together.
Press the [-/NO] button to clear messages.

Display Messages

Description
49
P-255 Owner's Manual