Saving The Created Data To A Usb Storage Device; File/Folder Selection - Yamaha DTX900M Owner's Manual

Quick Guide

Saving the Created Data to a USB Storage Device

The File mode provides tools for transferring data between the instrument and the USB stor-
age device connected to the USB TO DEVICE connector. This section describes how to save
all the data (including Drum Kit, Drum Voice, Song, and Trigger Setup, etc.) to a USB stor-
age device as a single file and load it from the device to the instrument.

File/Folder Selection

The illustrations and instructions below show you how to select files and folders on the USB storage devices within the File
mode.
Select the File Type (page 113) from the TYPE column, then
press the Cursor [M] button to move the cursor to the File/
Directory box at the right section in the display.
To return to the next
highest level, press the
[EXIT] button.
Select the directory or file by using the [INC/DEC],
[DEC/NO], Cursor [B]/[V] buttons and data dial.
54
DTX900 Owner's Manual
To go to the next lowest
level, highlight the desired
folder and press the
[ENTER/STORE] button.
NOTE
• For details about USB storage
devices, see page 21.