Table of Contents
Advertisement
Click Sound Settings
Setting How the Click Sound is Played
From this display, you can set the parameters which deter-
mine under what circumstances the click and the output for
the click sound.
1
1 Mode
Determines how and under what circumstances the click is
played. The click can be started or stopped in synchronization
with song playback/recording according to the setting here, as
well as by pressing the [CLICK ON/OFF] button.
Settings
manual, play, rec, play&rec
manual
The Click is started/stopped only by pressing
the [CLICK ON/OFF] button.
play
The Click is started/stopped by starting/stop-
ping the Song playback, as well as by pressing
the [CLICK ON/OFF] button.
rec
The Click is started/stopped by starting/stop-
ping the Song recording, as well as by pressing
the [CLICK ON/OFF] button.
play&rec The Click is started/stopped by starting/stop-
ping the Song playback/recording, as well as by
pressing the [CLICK ON/OFF] button.
B MIDI Out
Determines whether or not the MIDI note number corre-
sponding to the Click Voice is transmitted via MIDI OUT.
When this parameter is set to on, the following MIDI events
are transmitted via MIDI OUT.
MIDI channel
Accent note
10
1/4 note
10
Other notes
10
Settings
off, on
NOTE
• The MIDI note events corresponding to the Click sound will be trans-
mitted via MIDI OUT only when the Click sound is produced. The
MIDI note events corresponding to the Click sound for which the Vol-
ume is turned down to the minimum level on the [F1] PLAY display will
not be transmitted via MIDI OUT. Likewise, the MIDI note events cor-
responding to the Click sound during "Break" of the Measure Break
function will not be transmitted via MIDI OUT.
C OutputSel (Output Select)
Determines the output jack for the click sound.
L&R+ph (OUTPUT and PHONES), Phones
(PHONES), L&R (OUTPUT), ind1&2 –
Settings
ind5&6 (INDIVIDUAL OUTPUT 1 and 2 – 5
and 6), ind1 – ind6 (one of the INDIVIDUAL
OUTPUTs)
[SF1] OUTPUT
2
3
Note
Velocity
B#-1
127
C0
127
B-1
127
Using the Measure Break Function
From this display, you can set the parameters related to the
Measure Break function. By using this function, the Click
Voice can be played back for specified measures and muted
for specified measures repeatedly.
This function can be effectively used to bring your rhythm
technique and timing up to a higher level—letting you play
a certain drum phrase for several measures while listening
to the Click Voice, then play the next several measures with
no Click sound. For example, to have four measures with
the Click Voice followed by four measures without, set the
Measure parameter to 4 and the Break parameter to 4.
1
1 Measure/Break
Determines whether the Measure Break function is active or
not. When set to on, the Click Voice is played back for mea-
sures specified at 2 and muted for measures specified at 3
repeatedly.
Settings
off, on
B Measure
Determines the amount of measure range within which the
Click sound is played (not muted).
Range
1 – 9
C Break
Determines the amount of measure range within which the
Click sound is muted.
Range
1 – 9
Reference
Click Mode [CLICK]
[F5] OTHER
[SF2] MEASBRK
2
3
107
DTX900 Owner's Manual
Advertisement
Table of Contents
