Service And Support - Oki MC362w Safety And Warranty Manual

entity, or other individual sending the message, and the
telephone number of the sending machine or such
business, other entity, or individual. (The telehone
number provided may not be a 900 number or any other
number for which charges exceed local or long-distance
transmission charges.)
To comply with this law, you must enter the following
information in your fax unit:
• Date and time: see "Changing the Date and Time"
under Setting Your Terminal in the User's Guide for
instructions on doing this.
Name and telephone number which identify the source
of your fax transmission: see Your fax number/your
name under Setting Your Terminal in the User's Guide for
instructions on doing this.
FCC Radio Frequency Interference Statement for
120-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Plug the unit into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/television
technician for help.
Note: It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC
regulations.
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
FCC Radio Frequency Interference Statement for
220/240-Volt Models
WARNING: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to
correct the interference at their own expense.
Note: It is the responsibility of the user to obtain the
required shielded cable in order to ensure
compliance of this equipment with FCC
regulations.
Changes or modifications not expressly approved by Oki
Data may void your authority to operate this device.
California Requirement
Perchlorate Warning Applicable to Lithium Batteries
Sold and/or Distributed in California
Perchlorate Material: special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.
Industry Canada (IC) Radio Interference
Statements
This Oki Data apparatus complies with the Class B limits
for radio interference as specified in the IC Radio
Interference Regulations.
Industry Canada (IC) Requirements for
End Users
This product meets the applicable Industry Canada
technical specifications.
The Ringer Equivalence Number is an indication of the
maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may
consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices
does not exceed five.
European Union Council of the European
Communities Statements of Conformance
for 220/240-Volt Models
Electromagnetic Conformance
This product complies with the requirements of the
Council Directive 89/336/EEC on the approximation of the
laws of the member states relating to electromagnetic
compatibility.
Safety Conformance
This product is in conformity with Directive 73/23/EEC on
the harmonization of the laws of Member States relating
to electrical equipment designed for use within certain
voltage limits.
5 - English