Rtc Battery - HP Pavilion TouchSmart 14-b100 Maintenance And Service Manual

RTC battery

Description
RTC battery
IMPORTANT:
and replacement.
Before removing the RTC battery, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
8. Remove the USB board (see
9. Remove the WLAN (see
10. Remove the system board (see
Remove the RTC battery:
1. Turn the system board upside down, with the front toward you.
2. Remove the RTC battery (1) by pressing down with a thin plastic tool or your finger. The battery
is spring loaded and will pop up. Lift and remove the RTC battery (2).
Reverse this procedure to install the RTC battery.
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
USB board/audio jack on page
WLAN module on page
System board on page
42).
46).
50).
54).
57).
58).
61).
Component replacement procedures
Spare part number
697917-001
69