Speakers
Description
Speakers (include speaker cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
a.
Keyboard (see
b.
Top cover (see
c.
Fan (see
d.
WLAN module (see
e.
System board (see
Remove the speakers:
1.
Release the speaker cable from the retention clip (1) built into the base enclosure.
2.
Release the speakers from the alignment posts (2) built into the base enclosure.
60
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Keyboard on page
Top cover on page
Fan on page
42).
WLAN module on page
System board on page
30), and then remove the following cables:
31).
33).
44).
49).
Spare part number
726208-001