Fan
Description
Fan (includes cable)
Before removing the fan, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the top cover (see
Remove the fan:
1.
Turn the system board upside down with the front toward you.
2.
Disconnect the fan cable (1) from the system board.
3.
Release the fan cable (2) from beneath heat sink pipe.
4.
Remove the Phillips PM2.5×5.6 screw (3) that secures the fan to the system board.
5.
Release the fan (4) by lifting the rear edge of the fan.
42
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
30).
Keyboard on page
31).
Top cover on page
33).
Spare part number
725620-001