Table of Contents
Advertisement
Optical drive
NOTE:
The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe*
NOTE:
*Select models only.
Blu-ray Disc ROM with LightScribe* DVD±R/RW SuperMulti Double-Layer Drive
NOTE:
*Select models only.
Before removing the optical drive:
1.
Battery (see
2.
Service access cover (see
Remove the optical drive:
1.
Remove the Phillips 3.0×2.5 screw (1) that secures the optical drive to the computer.
2.
Insert a thin tool, such as a screw driver (2), into the release access slot next to the hard drive
bay.
3.
Grasp the bezel and slide the optical drive out of the computer (3).
4.
To replace the optical drive bracket, position the optical drive with the optical drive bracket
toward you.
5.
Remove the two Phillips 3.0×2.0 screws (1) that secure the optical drive bracket to the optical
drive.
48
Chapter 4 Removal and replacement procedures
Battery on page
44)
Service access cover on page
Spare part number
636380-001
636379-001
45)
ENWW
Advertisement
Table of Contents
