System Board - HP Pavilion dv3-4100 - Entertainment Notebook PC Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use only with Intel Core Quad processors
For use only with Intel Core Dual and Core2 processors
For use only with Intel Core Quad processors (1 GB)
For use only with Intel Core Dual and Core2 processors (1 GB)
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. WLAN module (see
b. Hard drive (see
c. Optical drive (see
d. Top cover (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory modules (see
●
RTC battery (see
●
RTC battery (see
●
Memory modules (see
●
Fan/heat sink assembly (see
●
Processor (see
62 Chapter 4 Removal and replacement procedures
Battery on page
WLAN module on page
Hard drive on page 46
Optical drive on page
Top cover on page
Memory module on page
RTC battery on page
RTC battery on page
Memory module on page
Fan/heat sink assembly on page
Processor on page 68)
38), and then remove the following components:
42)
50)
51)
39)
45)
45)
39)
Spare part number
611348-001
599414-001
622627-001
622626-001
65)