Switching The Screen Image (F2); Decreasing Screen Brightness (F3); Increasing Screen Brightness (F4); Initiating Standby (F5) - HP Mini 5101 User Manual

Switching the screen image (f2)

Press f2 to switch the screen image among display devices connected to the system. For example, if a
monitor is connected to the computer, pressing
to monitor display to simultaneous display on both the computer and the monitor.
Most external monitors receive video information from the computer using the external VGA video
standard. Pressing
the computer.
The following video transmission types, with examples of devices that use them, are supported by the
f2key:
●
LCD (computer display)
●
External VGA (most external monitors)

Decreasing screen brightness (f3)

Press f3 to decrease screen brightness. Hold down the key to decrease the brightness level
incrementally.

Increasing screen brightness (f4)

Press f4 to increase screen brightness. Hold down the key to increase the brightness level
incrementally.

Initiating Standby (f5)

Press f5 to initiate Standby.
When Standby is initiated, your information is stored in system memory, the screen is cleared, and power
is conserved. While the computer is in the Sleep state, the power lights blink.
CAUTION:
The computer must be on before you can initiate Standby.
To exit Standby, briefly press the power button or press any key on the keyboard.
The function of the
instead of Standby.

Initiating QuickLock (f6)

Press f6 to initiate the QuickLock security feature.
QuickLock protects your information by displaying the operating system Log On window. While the Log
On window is displayed, the computer cannot be accessed until a password is entered.
NOTE: Before you can use QuickLock, you must set a password.
To use QuickLock, press
instructions on the screen to enter your password and access the computer.
78 Chapter 8 Pointing devices and keyboard
f2 can also alternate images among other devices receiving video information from
To reduce the risk of information loss, save your work before initiating Standby.
f5 key can be changed. For example, you can set the
f6 to display the Log On window and lock the computer. Then follow the
f2 alternates the screen image from computer display
f5 key to initiate Hibernation