Dell PowerEdge VRTX Getting Started Manual page 13

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Maintenance Projects\Dell
The following example illustrates accessing privileged EXEC mode and then
returning to the User EXEC mode:
console>enable
Enter Password: ******
console#
console# disable
console>
Use the exit command to return to a previous mode.
To configure the device, enter the next level, Global Configuration mode.
Global Configuration Mode
The Global Configuration mode manages device configuration on a global
level. Global Configuration commands apply to system features, rather than a
specific protocol or interface.
To access Global Configuration mode, at the Privileged EXEC Mode prompt,
type configure and press <Enter>. The Global Configuration mode displays
as the device host name followed by (config) and the pound sign #:
console# configure
console(config)#
To list the Global Configuration commands, enter a question mark at the
command prompt.
The following example illustrates how to access Global Configuration mode
and return back to the Privileged EXEC mode:
console#
console# configure
console(config)# exit
console#
Interface Configuration Mode
The Interface Configuration mode configures the device at the physical
interface level (port, VLAN, or LAG). Interface commands that require
subcommands have another level, called the Subinterface Configuration
mode. A password is not required to access this level.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 3 / 6 / 1 3 - F O R P R O O F O N LY
Plasma\GSG\Plasma_UGUsing_CLI.fm
Using the CLI
13