Turning On Your Tv For The First Time - Insignia NS-39D400NA14 User Manual

Insignia 39" LED TV
Turning on your TV for the
first time
The first time you turn on your TV, the TV SETUP
wizard opens. The wizard guides you through
setting up basic settings including the menu
language, time setting, picture mode, TV signal
source, and the channel list.
To set up your TV:
1 Make sure that you have:
• Installed the remote control batteries. (See
page 35 for details.)
• Connected an antenna, cable TV, or satellite
TV. (See page
• Connected the power cord. (See page
details.)
2 Press (power) to turn on your TV. The Choose
your Menu Language screen opens.
3 Press or to highlight the language you
want, then press ENTER. The time setting screen
opens.
4 Press or to highlight Mode, then press
access the setting.
5 Press or to select Manual (to set the date
and time manually) or Auto (to set the date and
time automatically from a TV signal source
based on the time zone you select), then press
ENTER, MENU, or .
Note
If you select Auto, the displayed time will
be incorrect until your TV gets the correct
time from a TV signal source.
12 through 17 for details.)
34
www.insigniaproducts.com
6 Press
to access the setting.
7 Press
select Eastern, Central, Mountain, Pacific,
Alaska, Hawaii, Atlantic, or Newfoundland,
then press ENTER, MENU, or .
8 Press
press
9 Press
observes Daylight Savings Time) or Off (if your
viewing area does not observe Daylight Savings
Time), then press ENTER, MENU, or .
10 If you selected Manual for Mode:
• Press
then press
to adjust the setting, then press ENTER.
for • Press
access the setting. Press
the hour, minute, or AM/PM field, then press
or
finished, press ENTER.
11 When you have finished setting the time, press
ENTER. The What is your viewing environment
screen opens.
12 Press
Store Display Mode, then press ENTER.
If you selected Store Display Mode, a message
asks if you are sure you want this mode. Select
Yes to continue using Store Display Mode, or
select No to change your selection, then press
ENTER. Store Display Mode is not an energy
savings mode and will display a retail banner.
The Choose your TV Source screen opens.
to
or to highlight Time Zone, then press
or to select your time zone. You can
or to highlight Daylight Saving, then
to access the setting.
or to select On (if your viewing area
or to highlight Year, Month, or Day,
to access the setting. Press
or to highlight Time, then press
or
to adjust the setting. When you are
or to highlight Home Use Mode or
or
to
to highlight
36